搞到了c75的22版和24版,客服包依然显示92版,我想大概流传的都是这样坑爹的版本了吧,打开客服包,依然是“Error on waiting for Flash-Code”
因为之前给淡泊宁静弄的时候已经从客服包里面提取过xbi,然后他刷入还是有问题,因此,准备直接上24版的客服包。
============
刷24版客服,滴
刷回fireware中。
============
刷回后,顺利开机。
决定重建bcore。已完成,重新备份了下;
然后准备刷24版的ffs和map
刷xfs格式的ffs的时候,Wrong Split-ID, SW and LanguageGroup dont fit together
刷map的时候,出现如上提示
=====================
继续刷24版客服,仍旧滴一声。
然后用papu进service mode 出现提示
Boot in "Service mode"...
Press RED key (Power ON)!
Auto Ignition...
Transfer boot...
Boot in "Service mode" Ok
Awaiting Power On phone...
Phone was switched off on error:
EXIT: 0000:DA7E
FILE:
hw_det
CPSR: 60000010
CepId: 40F1
ExitString:
Invalid HW
准备刷回备份,因为有高手提示,说要先写入skey
刷回备份,顺利开机,enter the skey,然后继续备份
===================================
高手发来了个经过修改的cx65的fullflash,经过bingk的那个帖子处理过后,+b参数 刷入机器。开机白屏,有声音,通过截屏软件,截到的只是130*130的屏幕,拔掉sim卡,开机,依然白屏,用papu进入,再次截图,依旧是130*130,拨打112 和911的时候,输入无问题,绿键无反应。
因高手暂时撤退,告一段落。刷回备份。
=================================
Boot in "Service mode"...
Press RED key (Power ON)!
Auto Ignition...
Transfer boot...
Boot in "Service mode" Ok
Awaiting Power On phone...
Phone was switched off on error:
EXIT: 0000:DA7E
FILE:
hw_det
CPSR: 60000010
CepId: 40F1
ExitString:
Invalid HW