关于m75橡胶脱落的2张照片

hhjjssdd · 发表于 2006-5-20 15:31:45

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。

您需要登录才可以下载或查看，没有帐号？注册会员

x

一直很关注m75，看到有不少机油说m75使用一段时间后，橡胶脱落的很厉害，心里有点不爽，西门子的绝版3防难道真的如此不济？
在坛子里面看了不少关于m75的文章，提到此事的是少之又少，更是没有图片，于是只好到国外网站上找找，终于找到两张，虽然不是很清楚。希望能给像我一样关注西门子的朋友们一个客观的m75。
也希望已经拥有m75的朋友也将你们使用一段时间后的感想写出来，能配图就更好了
我还是会一如既往地支持西门子，支持m75，尽管它有这样那样的不足

hhjjssdd · 发表于 2006-5-20 15:42:43

http://www.club-siemens.net/forum/viewthread.php?tid=48930 原贴地址

Hi the rubber edges on my battery cover are falling off Ive only had it a little over a mounth!!!!!! any1 else having probs with it。the rubber sides on the battery cover have buckled and fallen off!!!!!!!!!!!!!!!!! There is no longer rubber on the sides of it!!!!!!!!!

I noticed that mine is falling apart too. Also, upon further inspection, it looks like the rubber is glued onto the side of the battery cover.for the time being, i dabbed in some glue to keep it there. If the whole thing comes off, then i'll probably apply a more thorough layer of stronger glue.

I have the same problem with the rubber on the battery cover falling off.

I didn't touch it, since I had to take the phone to the service center for other problems anyway. I asked them about repairing the rubber, and they said they'll see what can be done about it. Well, when I got the phone back they did nothing about the rubber, saying it wasn't covered by the warranty and tried selling me a new cover....for a prohibitive price that is !!

WARNING TO ALL THAT HAVE THIS RUBBER PROBLEM

Two days after having the phone back, the rubber thing became really bad and started tearing apart. I tried gluing it back on, but it was too late since the rubber was already too stretched and wouldn't fit. I had to cut out about 2mm of it and then glue it back on...it still doesn't look good.

!!So, if you notice the rubber protection is coming off, glue it back immediately !!

This rubber seems to be a problem with the M75 ... is it possible Siemens would do anything about it and perhaps offer cheaper/free replacement for their customers ?! Guess not, right ?

speedtt · 发表于 2006-5-20 15:48:33

看不出脱落啊？？

策，风之伤 · 发表于 2006-5-20 15:52:42

有的，但是我只知道工程机有掉的，看到过，从上下2个边缘一点点开始的说。。。

风影之夜 · 发表于 2006-5-20 18:09:00

我的不是工程机, 也会脱落, 但不是一下子掉一大块,是慢慢磨平了, 机身四个角的橡胶尤其磨的厉害

hhjjssdd · 发表于 2006-5-21 15:19:00

有图吗？谁能上个图看看啊

sipzh · 发表于 2006-5-21 20:07:17

等我的M75到手后，我仔细瞧瞧啊！

福建老鬼 · 发表于 2006-5-22 09:26:57

电池盖那一圈的橡胶用段时间后是比较容易脱落，用胶水重新粘一下就好了。
另外机身的橡胶用段时间后会有磨损，这点比较不爽。

xxwn2005 · 发表于 2006-5-24 09:39:06

M65和M75，谁的三防更好？？？

smallbeast · 发表于 2006-5-24 18:18:09

觉得m65的更爽一些，呵呵

帐号		自动登录	找回密码
密码			注册会员