〖0110汉化组资源发布〗Brains.Theft 手机被盗保护软件 召唤翻译小组的兄弟

夜夜哥

'Theft' is a program for Nokia Series 60 mobile phones that works as a safe protection from being lost or stolen.



What is Theft?

?Theft’ starts automatically as the phone is turned on, and then always keeps detecting whether the phone is turned off in a wrong way, or your SIM Card is changed. It also keeps checking messages arriving for an activation text you previously defined (See the "SMS text to attack" in Program Settings section). Then ?Theft’ will attack the thief in three ways:

With a permanent text on the screen saying that ?THIS MOBILE IS LOST OR STOLEN’ along with any other text you provide; such as your name and contact telephone number.
The phone will send messages to a list of recipients you created for ?Theft’ to inform you that the phone is locked (It will also inform you of the new SIM number if someone has changed your SIM Card.).
A very loud long siren will sound from the phone alerting people in the vicinity and disturbing the thief.
THE THIEF WILL NOT BE ABLE TO FORMAT THE PHONE AS FORMATTING REQUIRES A LOCKCODE (THAT YOU CAN CHANGE FROM THE PHONE SYSTEM SETTINGS) AND FOR THE THIEF TO DO THIS IT WILL TAKE SOMETIME AND THAT TIME WOULD BE THE ENOUGH TIME FOR 'THEFT' TO LAUNCH.

How will the thief be affected?

The thief changes the SIM; this requires powering off or rebooting the phone. Of course that will happen without the thief turning ?Theft’ off first as the thief does not know the code you used to ?Turn off? ?Theft’. The result will be that the next time the phone is powered on, ?Theft’ will enter attack mode; will show the display, will send messages to the phone numbers in the ?Recipients? list and will emit the warning alarm tone.
The thief changes the SIM; assuming you have set the ?Attack on SIM change? field to ?Yes?, the next time the phone is powered on ?Theft’ will detect that the SIM has been changed and will enter attack mode, and will carry out the same actions as above including sending the details of the new SIM card in the text message. Even if the thief subsequently re-inserts the original SIM, the attack will repeat when the phone is powered on and will continue to do so until the phone is "Unlocked" with the required code.
The thief does not change the SIM card and you send a text message from any other mobile phone to your phone containing text you provided in ?SMS text to attack? field.
There is only one way to turn the phone back to the normal mode; you must press ?Unlock? and then you must enter your valid ?Turnoff code? the same code that you provided to ?Theft’ in the ?Application? page of the ?Program settings? section.

SX1测试通过！

[ 本帖最后由 小毛 于 2005-10-20 20:39 编辑 ]

kaneyet

FOR不FOR SX1的？？？

keelee

汉化了没？

water_1981

期待汉化  ing

Blade

有没有破解！

shinechou

谢谢楼主精彩分享，试试看！

夜夜哥

原帖由 kaneyet 于 2005-10-20 15:59 发表
FOR不FOR SX1的？？？

死小月大大的眼睛没看过我发的“SX1测试通过”啊。

汉化组翻译组的兄弟何在？这款软件我来汉化试试，下面的帮助文件就交给翻译组及热心的机油了。我E文不行啊，没办法。：）


What is Theft?
"Theft" is a program for Nokia Series 60 mobile phones that works as a safe protection from being lost or stolen.

‘Theft’ starts automatically as the phone is turned on, and then always keeps detecting whether the phone is turned off in a wrong way, or your SIM Card is changed. It also keeps checking messages arriving for an activation text you previously defined (See the SMS text to attack in Program Settings section). If any of these happen ‘Theft’ will attack the thief in three ways: 1) With a permanent text on the screen saying that ‘This mobile is lost or stolen’ along with any other text you provide; such as your name and contact telephone number. 2) The phone will send messages to a list of recipients you created for ‘Theft’ to inform you that the phone is locked (It will also inform you of the new SIM number if someone has changed your SIM Card.) 3) A very loud long siren will sound from the phone alerting people in the vicinity and disturbing the thief.

How to use Theft?
Transfer ‘Theft. sis’ file to your Nokia 60 series mobile phone through an Infrared or Bluetooth connection with any other device containing ‘Theft.sis’ file (PC or other mobile that has ‘Theft.sis’).

After successful installation, ‘Theft’ will run in the demo version and you will see Theft first screen.

If you press “Turn off”, ‘Theft’ will be closed; and ‘Theft’ will not be operational until next time you turn your phone off and on again. Doing this will mean that ‘Theft’ will not be protecting your phone. ‘Theft’ starts up when the phone power is turned on and should not be closed, it should be kept running in order to protect your phone. If you want to turn off ‘Theft’ and still protect your phone you should set “SIM change attack” field to “Enabled” (Attack on SIM change will be described shortly).
With ‘Theft’ running normally and not switched off, now press “Options” to see ‘Theft’ main menu and select “Program settings”.

Program settings:
Each time you need to enter the “Program settings” section of ‘Theft’, you will be required to enter your “Turnoff code” (this will be described shortly). The ‘Turnoff code’ is (0000) by default.

Now enter (0000) and press “Ok”.

Now you will see the “Register” screen.

The “Device Id” field is your mobile phone’s unique IMEI.
The “Registration Id” is the code you buy from your Retailer for activating the full functionality, “Registration Id” field is always “None” until you register your ‘Theft’ program.

Now use your joystick to go to the “Application” page of the “Program settings” section.


Application fields:
-The “To switch off phone” field is one of the most important fields for ‘Theft’. It indicates whether to set ‘Theft’ in active mode (by changing the “To switch off phone” field to “Will Turnoff Theft”), putting ‘Theft’ in active mode means that you must use your own “Turnoff code” to be able to “Turn off” ‘Theft’. Each and every time you or anyone else tries to “Turn off” ‘Theft’ you or they will be prompted for the ‘Turn off code’.
If you change the “To switch off phone” field to “Will Turnoff Theft”, you must “Turn off” ‘Theft’ first if you want to power off the phone without setting off the alarms and alerts. Otherwise next time your phone is powered on ‘Theft’ will launch automatically and will consider the phone is stolen (because the phone will sense it was powered off last time without turning 'Theft' off first).

If the “To switch off phone” field is “Won't Turnoff Theft” and the phone is powered off without turning off ‘Theft’ first, next time phone is powered on ‘Theft’ will launch in a normal mode but will not enter attacking mode.

-The “Attack on SIM change” field is one of the most important fields for ‘Theft’. It indicates whether to set ‘Theft’ in attack mode if the SIM card is changed. By changing the “Attack on SIM change” field to “Enabled”, if the thief tries to change your SIM Card, the phone will restart in attack mode and there is no way it can be turned back to the normal mode until you unlock it using your code. Even if the thief tried to change the SIM to the original one ‘Theft’ will keep entering attack mode until you unlock with your code. By setting this field to enabled you can safely turn off ‘Theft’ and it will also protect your phone as it will start up when the phone is next powered on and will detect if the SIM has been changed; if so it will enter attack mode.

-The “Turnoff code” field is where you can change the code you will be required to enter to be able to:
-enter the “Program settings” section of ‘Theft’.
-“Turn off” ‘Theft’ if the “To switch off phone” is “Will Turnoff Theft”, where you must turn off ‘Theft’ first to power off your phone.
-stop ‘Theft’ attack and turn it back to the normal mode.
It is recommended you change this code (up to 14 digits) to any code other than (0000) which is the default, as this code is the only way to bring ‘Theft’ back to normal mode if it is attacking.

-The “SMS text to attack” field is also very important to ‘Theft’. It indicates the text that the phone will recognise as your message to activate ‘Theft’ remotely. ‘Theft’ will begin the attack mode as a result of receiving an sms text containing this message from you. Sending a simple sms containing the text written in “SMS text to attack” field will turn the “To switch off phone” field to “Will Turnoff Theft” and put ‘Theft’ immediately in attack mode.
It is recommended you set this field to any simple and easy word(s) or phrase that you can remember.

Now use your joy stick to go to the next page of “Program settings” which is the
“Recipients” page.

Recipients list:

The “Recipients” page contains an empty list by default, you can add or remove from this list through the “Options” menu.
“Recipients” are mobile phone numbers that ‘Theft’ is going to send message to when the phone enters attack mode. This message will contain a simple text informing you that ‘Theft’ is now in attack mode and phone is locked (unusable). This message will also contain the SIM number the phone is using to assist tracking the thief. Also each time the thief changes the SIM card, the phone will require restart, and so ‘Theft’ will start again automatically when the phone power comes on and will attack again sending messages to the numbers in the “Recipients” list with the SIM card being used.

Now move your joystick to the right to go to next page of the “Program settings” section of ‘Theft’ which is “Actions” page.

Actions fields:

-The “Text on display” field is another of the most important fields in ‘Theft’, it is where you can edit text to be shown as a permanent display on the phone screen whilst in
‘Theft’ attack mode (when the phone is lost or stolen). It is recommended you type a phone number to contact you and possibly your address where someone can return the phone back to you. You may also like to indicate a reward for returning the phone.

-The “SMS to recipients” field indicates whether you want ‘Theft’ to send messages to the phone numbers in the “Recipients” list described above. By default this feature is “Off” as there are no numbers in “Recipients” list. It is recommended you add phone numbers to the recipients list and change this field to “On” ; otherwise ‘Theft’ will not send messages in the event it is lost or stolen.

-The “Raise alarm” field indicates whether you want ‘Theft’ to make a long loud warning alarm tone when the mobile phone enters attack mode. We recommend you turn this “On”.       


How Theft attacks:
‘Theft’ will be in attack mode in three cases:

1- ‘Theft’ “To switch off phone” field is “Will Turnoff Theft” and the phone powered off without “Turn off” selected first (This can only be done using your own code).

2- ‘Theft’ “Attack on SIM change” field is “Enabled” and the SIM card changed.

3- ‘Theft’ receives a message containing the text written in “SMS text to attack” field of ‘Theft’.

The phone screen will be the attack mode screen.

The display will show: “THIS MOBILE IS LOST OR STOLEN” with the text you filled in the “Text on display” field of ‘Theft’ that you provided to ‘Theft’ in the “Application” page of the “Program settings” section.

There is only one way to turn the phone back to the normal mode; you must press
“Unlock” and then you must enter your valid “Turnoff code” the same code that you provided to ‘Theft’ in the “Application” page of the “Program settings” section.

(Note: the attack can be canceled if the program is not registered as there will be a “Cancel” button, and this is the only difference between the Demo version and the registered one).

How will the thief be affected?
There are only two possibilities outcomes for the thief when stealing the phone:

1-The thief changes the SIM; this requires powering off or rebooting the phone. Of course that will happen without the thief turning ‘Theft’ off first as the thief does not know the code you used to “Turn off” ‘Theft’. The result will be that the next time the phone is powered on, ‘Theft’ will enter attack mode; will show the display, will send messages to the phone numbers in the “Recipients” list and will emit the warning alarm tone. (These options will have to have been enabled as explained above if they are to function.)

2-The thief changes the SIM; assuming you have set the "Attack on SIM change" field to "Enabled", the next time the phone is powered on ‘Theft’ will detect that the SIM has been changed and will enter attack mode, and will carry out the same actions as above including sending the details of the new SIM card in the text message. Even if the thief subsequently  re-inserts the original SIM, the attack will repeat when the phone is powered on and will continue to do so until the phone is "Unlocked" with the required code.
This is what will always happen even if the thief keeps powering off the phone or changing SIM cards.

(Note: if the thief does not change the SIM and you send a message from any other phone containing the “SMS text to attack” you provided, ‘Theft’ will enter attack mode as soon as the message reaches the phone and ‘Theft’ will turn the "To switch off phone" field “Will Turnoff Theft” and starts attack functions immediately.)


Theft Typical Usage:
To protect your phone with ‘Theft’ follow one of the following two procedures or both:

1- Set “Attack on SIM change’ field to “Enabled’ so any time your SIM changes and the phone requires restart, ‘Theft’ will enter attack mode as soon as the phone power is switched on. ‘Theft’ will also detect any change of the SIM card and attack even if it ‘Theft’ was not on before the SIM was changed.

2- Set “To switch off phone” field to “Will Turnoff Theft” and do not turn off ‘Theft’ but just keep it running in the background; keep using your phone as normal and when you want to turn the power off, first turn off ‘Theft’ with your own “Turn off” code, Because you haveturned ‘Theft’ off before turning the phone off, when you turn the phone on again ‘Theft’ will start to protect your phone for you and will not enter attack mode. But if the phone turned off without turning ‘Theft’ off first, the next time the phone power is turned on ‘Theft’ will attack as it will consider the phone is being used by someone other than the owner.


Theft is a complete protection for only
15.00 $

三璇儿

强烈期待汉化！  真的有朋友是通过防盗软件找回机器的哦！！ 所以不是吹的  真有用哦

小毛

我靠，英文信息还真多！

新加入的翻译小组的兄弟何在？？

dszyg

呵呵，以下是机器的翻译：

什么是偷窃?
"偷窃" 是一个节目为运作的Nokia 系列60 个流动电话因为安全保护免受丢失或被窃取。

` 偷窃' 总自动地当电话起动, 并且然后开始保留查出是否电话被关闭用一个错误方式, 或您的SIM 卡片被改变。 并且它保留检查消息到达您早先定义的活化作用文本(参见SMS 文本攻击在节目设置部分) 。 如果任何这些发生` 偷窃' 将攻击窃贼用三种方式: 1) 永久文本在屏幕说法, ` 这机动性丢失或被窃取' 与其他文本一起您提供; 譬如您的名字和联络电话号码。 2) 电话将寄发消息到您创造为` 偷窃' 通知您接收者的名单电话被锁(它并且将通知您新SIM 数字如果某人改变了您的SIM 卡片。) 3) A 非常大声的长的警报器将听起来从电话使人警觉在附近和干扰窃贼。

怎么使用偷窃?
调动` 偷窃。 sis 的文件对您的Nokia 60 系列流动电话通过与其他设备的红外线或Bluetooth 连接包含` 偷窃。sis 的文件(个人计算机或有` 偷窃的其它机动性。sis 的) 。

在成功的设施以后, ` 偷窃' 将运行在演示版本并且您将看见偷窃第一个屏幕。

如果您按"关闭", ` 偷窃' 将是闭合的; 并且` 偷窃' 不会可使用直到下次您起动您的电话和再。 做这意味, ` 偷窃' 不会保护您的电话。 ` 偷窃' 开始当电话电源被打开和不应该是闭合的, 它应该继续跑为了保护您的电话。 如果您想要关闭` 偷窃' 和仍然保护您的电话您应该设置"SIM 变动攻击" 领域对"使能" (对SIM 变动的攻击突然将被描述) 。
用` 偷窃' 通常运行和没交换, 现在按"选择" 看` 偷窃' 主菜单和选择"节目设置" 。

节目设置:
每次您需要输入"节目设置" 部分` 偷窃', 您将被要求键入您的"岔开代码" (这突然将被描述) 。 ` 岔开代码' 是(0000) 。

现在进入(0000) 并且按"好" 。

现在您将看见"记数器" 屏幕。

"设备Id" 领域是您的流动电话的独特的IMEI 。
"注册Id" 是您买从您的贩商为激活充分的功能的代码, "注册Id" 领域总是"无" 直到您登记您的` 偷窃' 节目。

现在使用您的控制杆去"节目设置" 部分的"应用" 页。


应用领域:
- "对开关电话" 领域是最重要的领域的当中一个为` 偷窃' 。 它表明是否设置` 偷窃' 在活跃方式下(由改变"对开关电话" 领域对"将岔开偷窃"), 投入` 偷窃' 在活跃方式意味, 您必须使用您自己"岔开代码" 能"关闭" ` 偷窃' 。 □时刻您或任何人尝试"关闭" ` 偷窃' 您或他们提示对于` 关闭代码' 。
如果您改变"对开关电话" 领域对"将岔开偷窃", 您必须"关闭" ` 偷窃' 首先如果您想要供给电话动力没有引起警报和戒备。 否则其次计时您的电话供给动力在` 偷窃' 自动地将发射和将考虑电话被窃取(因为电话将感觉它供给动力了上次没有转动的' 偷窃' 首先) 。

如果"对开关电话" 领域是"不会将岔开偷窃" 和电话供给动力没有转动` 偷窃' 首先, 下个时间电话供给动力在` 偷窃' 将发射在一种正常振荡型下但不会进入攻击的方式。

- 对SIM 变动的"攻击" 领域是最重要的领域的当中一个为` 偷窃' 。 它表明是否设置` 偷窃' 在攻击方式下如果SIM 卡片被改变。 由改变对SIM 的"攻击改变" 领域到"使能", 如果窃贼设法改变您的SIM 卡片, 电话将重新开始在它可能被转动回到正常振荡型的攻击方式下并且没有方式直到您打开它使用您的代码。 既使窃贼被设法改变SIM 到原始的一` 偷窃' 将继续进入攻击方式直到您开锁以您的代码。 由设置这个领域对使能您能安全地关闭` 偷窃' 并且它并且将保护您的电话因为它将开始当电话其次供给动力并且将查出如果SIM 被改变了; 如果如此它将进入攻击方式。

- "岔开代码" 领域是您能改变您将被要求键入能的代码的地方:
- 输入"节目设置" 部分` 偷窃' 。
-"Turn" ` 偷窃' 如果"对开关电话" 是"将岔开偷窃", 您必须关闭` 偷窃' 首先对力量您的电话的地方。
- 停止` 偷窃' 攻击和转动它回到正常振荡型。
它被推荐您变动这个代码(14 个数字) 对是缺省的任一个代码除之外(0000), 因为这个代码是唯一的方式带来` 偷窃' 回到正常振荡型如果它攻击。

- "SMS 文本攻击" 领域并且是非常重要对` 偷窃' 。 它表明电话将认出作为您的消息遥远地激活` 偷窃' 的文本。 ` 偷窃' 将开始攻击方式由于接受sms 文本包含这则消息从您。 寄发简单的sms 包含文本被写在"SMS 文本对攻击" 领域将转向"对开关电话" 领域"将岔开偷窃" 和将投入` 偷窃' 立刻在攻击方式下。
它被推荐您设置了这个领域对您能记住的任一个简单和容易的词或词组。

现在使用您的喜悦棍子去是"节目设置" 的下页
"接收者" 页。

接收者名单:

"接收者" 页包含一张空的名单, 您能从这张名单补充说或去除通过"选择" 菜单。
"接收者" 是流动电话号码, ` 偷窃' 寄发消息对当电话进入攻击方式。 这则消息将包含简单的文本通知您, ` 偷窃' 现在是攻击方式并且电话是锁着的(不能再用) 。 这则消息并且将包含电话使用协助跟踪窃贼的SIM 数字。 并且每次窃贼改变SIM 卡片, 电话将要求再开始, 和因此` 偷窃' 自动地再将开始当电话力量进展并且将攻击再寄发消息到数字在"接收者" 名单与SIM 卡片被使用。

现在移动您的控制杆在右边去"节目设置" 部分是"行动" 页的下页的` 偷窃' 。

行动领域:

- "文本在显示" 领域是另最重要的领域在` 偷窃', 它是您能编辑文本被显示作为永久显示在电话屏幕的地方
` 偷窃' 攻击方式(当电话丢失或被窃取) 。 它被推荐您型电话号码与您和可能某人可能退回电话回到您的您的地址联系。 您可以并且喜欢表明退回电话的奖励。

- "SMS 对接收者" 领域表明是否您要` 偷窃' 寄发消息到电话号码在"接收者" 名单被描述上面。 这个特点是".off." 尽管没有数字在"接收者" 名单。 它被推荐您增加电话号码来接收者列出和改变这个领域到".on."; 否则它丢失或被窃取的` 偷窃' 不会送信在事件。

- "培养警报" 领域表明是否您要` 偷窃' 做一个长的大声的警告警报定调子当流动电话进入攻击方式。 我们推荐您转动这".on." 。


怎么偷窃攻击:
` 偷窃' 将是在攻击方式下在三个案件:

1 个` 偷窃' "对开关电话" 领域是"将岔开偷窃" 和电话供给动力没有"转动" 首先选择(这可能只做使用您自己的代码) 。

2 ` 偷窃' "对SIM 变动的攻击" 领域"使能" 并且SIM 卡片被改变。

3 ` 偷窃' 收到一则消息包含文本被写在"SMS 文本对攻击" 领域` 偷窃' 。

电话屏幕将是攻击方式屏幕。

显示将显示: "这机动性丢失或窃取" 以文本您填装了` 偷窃的"文本在显示" 领域' 那您提供对` 偷窃' 在"节目设置" 部分的"应用" 页。

有只单程转动电话回到正常振荡型; 您必须按
"打开" 并且您必须然后键入您合法的"岔开代码" 您提供对` 偷窃' 在"节目设置" 部分的"应用" 页的同样代码。

(笔记: 攻击可能被取消如果节目不登记尽管有将是"取消" 按钮, 并且这是唯一的区别在演示版本和登记的一个之间) 。

窃贼怎么将是受影响的?
有只二个可能性结果为窃贼当窃取电话:

1-The 窃贼改变SIM; 这要求供给或重新起动电话动力。 当然因为窃贼不知道将发生没有窃贼转动的` 偷窃' 首先的代码您使用了"关闭" ` 偷窃' 。 的结果将是当下次电话供给动力, ` 偷窃' 将进入攻击方式; 将显示显示, 将寄发消息到电话号码在"接收者" 名单, 将散发警告警报口气。 (这些选择按照说明将必须使能以上如果他们将起作用。)

2-The 窃贼改变SIM; 承担您设置了对SIM 变动的"攻击" 领域对"使能", 当下次电话供给动力在` 偷窃' 查出SIM 被改变了和将进入攻击方式, 并且将执行行动和一样在包括送新SIM 卡片的细节在文本消息之上。 既使窃贼随后再插入原始的SIM, 攻击将重覆电话供给动力并且将继续做如此直到电话"开锁" 以必需的代码。
这是什么总将发生既使窃贼继续供给动力电话或改变的SIM 卡片。

(笔记: 如果窃贼不改变SIM 并且您送信从其他电话包含"SMS 文本对攻击" 您提供, ` 偷窃' 将进入攻击方式当消息到达电话并且` 偷窃' 将转动"对开关电话" 领域"将岔开偷窃" 并且开始立刻攻击作用。)


偷窃典型的用法:
保护您的电话以` 偷窃' 仿效以下二种做法或两个的当中一个:

1 对SIM 变动的集合"攻击' 领域对" 使能' 如此在您的SIM 改变时侯并且电话要求再开始, ` 偷窃' 将进入攻击方式当电话力量被交换。 ` 偷窃' 将查出任一SIM 卡片的变动和并且将攻击既使它` 偷窃' 没有打开在SIM 被改变了之前。

2 集合"对开关电话" 领域"将岔开偷窃" 和不关闭` 偷窃' 但正义保留它运行在背景中; 和正常和当您想要关闭电源继续使用您的电话, 第一转动` 偷窃' 与您自己"关闭" 代码, 由于您haveturned ` 偷窃' 在关闭电话之前, 当您转动电话在再` 偷窃' 将开始保护您的电话为您和不会进入攻击方式。 但如果电话关闭了没有转动的` 偷窃' 首先, 当下次电话力量被转动在` 偷窃' 将攻击因为它将考虑电话由某人使用除所有者之外。


偷窃是完全保护为只
15.00 $

小毛

原帖由 dszyg 于 2005-10-20 21:54 发表
呵呵，以下是机器的翻译：

什么是偷窃?
"偷窃" 是一个节目为运作的Nokia 系列60 个流动电话因为安全保护免受丢失或被窃取。

` 偷窃' 总自动地当电话起动, 并且然后开始保留查出是否电话被关闭用 ...

用软件翻译的不成人话...

夜夜哥

哈哈，我的帮助文件就是用金山快译进行汉化的。嘿嘿。没办法啊，等翻译组的兄弟出手翻译后我修改之。

beybey

我吓  软件这么垃圾啊 翻译出来的东西就成这个样拉！！！

独步天涯

怎么早没这软件`手机都丢了```555