爱技术

 找回密码
 注册会员

QQ登录

只需一步,快速开始

微信登录

微信扫一扫,快速登录

搜索
查看: 704|回复: 15
收起左侧

研究中....SXG75拍照照片不能保存,提示"fail to capture", 如何解决?

[复制链接]
发表于 2008-9-16 08:24:05 | 显示全部楼层 |阅读模式

马上注册,结交更多好友,享用更多功能,让你轻松玩转社区。

您需要 登录 才可以下载或查看,没有帐号?注册会员 微信登录

x
黑色正式机, 版本是26, 后摄像头拍照照片不能保存,提示"fail to capture", 存放路径无论是手机还是卡, 都出现同样的提示.

但后摄像头能拍录像, 也能存录像.

前摄像头能拍能存

重刷了26, 22 版本后还这样.


2008.9.25:
Q: SXG75, SW is 26, appear "failed to capture" while take photo by the rear camera , but the front camera works well.

I reflashed the SW to 22, and 26, but did not solve this problem.
Is problem of hardware or software ? how to solve the problem ? Thanks in advance for the friends to help me .


A: hi!
are you saving them to the internal memory or the memory card?
how's the ammount of memory in both sides?
go back to FW22, with the customization mode enable, to erase all your flexmemory.
do not load any backup and try.
also, delete the sysfile in the mmc card root.

[ 本帖最后由 watercool 于 2008-9-25 11:05 编辑 ]
 楼主| 发表于 2008-9-16 08:41:56 | 显示全部楼层
第一张是按快门前, 第二张是按快门后, 提示 fail to capture.
DSCN0780.JPG
DSCN0782.JPG
回复 支持 反对

使用道具 举报

发表于 2008-9-16 09:15:49 | 显示全部楼层
我的正常,没遇到过这种情况,是不是设置有问题?
回复 支持 反对

使用道具 举报

发表于 2008-9-16 09:16:20 | 显示全部楼层
有个自我检测,检测一下看看有没有什么问题。
回复 支持 反对

使用道具 举报

 楼主| 发表于 2008-9-16 11:18:08 | 显示全部楼层
*#06# 里头测试后摄像头, 前摄像头都通过的, 测试里头只测能不能启动摄像头, 不测拍照和存照片文件.
回复 支持 反对

使用道具 举报

 楼主| 发表于 2008-9-16 12:05:50 | 显示全部楼层
新发现,  切换成前摄像头的话, 能拍能存, 即  switch camera  到 front camera .

back camera不行.
回复 支持 反对

使用道具 举报

发表于 2008-9-17 00:59:34 | 显示全部楼层
没遇过,刷刷看吧,
回复 支持 反对

使用道具 举报

 楼主| 发表于 2008-9-17 10:05:39 | 显示全部楼层
重刷了 26, 故障一样.
接着再刷了22, 故障一样.
又刷回到26, 故障一样.
回复 支持 反对

使用道具 举报

发表于 2008-9-17 10:12:09 | 显示全部楼层
http://mobile.0110.cn/viewthread ... &extra=page%3D1

10,HWTP
这个工具也是功能强大,直接联机做一些硬件设置。有兴趣的可以研究一下。

看看摄像头硬件设置,不知道有没有效呢
回复 支持 反对

使用道具 举报

发表于 2008-9-17 10:12:34 | 显示全部楼层
不过小心,不知道会不会搞坏
回复 支持 反对

使用道具 举报

 楼主| 发表于 2008-9-17 10:29:09 | 显示全部楼层
后摄像头能拍录像, 就是不能拍照 .


谢谢pan提供的资源和指导.

[ 本帖最后由 watercool 于 2008-9-17 10:33 编辑 ]
回复 支持 反对

使用道具 举报

发表于 2008-9-17 10:44:19 | 显示全部楼层
既然这样退了吧
回复 支持 反对

使用道具 举报

 楼主| 发表于 2008-9-22 16:11:19 | 显示全部楼层
谢谢边城

最后我还是拿了, 没退~

等我有时间了再看看能不能弄好~
回复 支持 反对

使用道具 举报

 楼主| 发表于 2008-9-25 11:06:02 | 显示全部楼层
2008.9.25:
Q: SXG75, SW is 26, appear "failed to capture" while take photo by the rear camera , but the front camera works well.

I reflashed the SW to 22, and 26, but did not solve this problem.
Is problem of hardware or software ? how to solve the problem ? Thanks in advance for the friends to help me .


A: hi!
are you saving them to the internal memory or the memory card?
how's the ammount of memory in both sides?
go back to FW22, with the customization mode enable, to erase all your flexmemory.
do not load any backup and try.
also, delete the sysfile in the mmc card root.
回复 支持 反对

使用道具 举报

发表于 2008-9-27 19:38:19 | 显示全部楼层
摄像头问题解决了!
原来后摄像头拍照能预览, 但不能拍照, 提示"fail to capture",今天拆机发现是接触的问题,按压移动了几次,接触问题就解决了,现在此机无任何问题了。
回复 支持 反对

使用道具 举报

发表于 2009-3-20 20:55:51 | 显示全部楼层
楼上的,请教下,拆机按压哪些部位,我的手机也是一样的毛病
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 注册会员 微信登录

本版积分规则

小黑屋|Archiver|手机版|爱技术 ( 沪ICP备08115260号-3 )

GMT+8, 2025-6-16 00:30

Powered by Discuz! X3.4 Licensed

Copyright © 2001-2020, Tencent Cloud.

快速回复 返回顶部 返回列表