我的SX1竟然出现这样的串号、、、、

comdin

1. Smelter :  v7.82
   
2. OS :  Microsoft Windows (2) 5.1.2600 Service Pack 2
   
3. Fullflash :  D:\Î÷»ú×ÔÓÃ\Éý¼¶°ü\sx1xx.bin
   
4. Size :  800012 = 8.0000171661377M = 8388626
   
5. Firmware :  SX1 v15 lg44
   
6. Loading base :  7FFFEE
   
7. Mobile :  SX1
   
8. Assembling date :  07.10.04 / 11:11:57
   
9. FlashID :  0089/8854 = 5489, 0090/0090 = 9090
   
10. 
    
11. ********************************************************************************
    
12. 
    
13. PhoneID
    
14. Skey
    
15. Number of EEPROM-blocks :  354
    
16. Number of deleted blocks :  302
    
17. IMEI :  3B453B-45-3B3AD43
    
18. 
    
19. ********************************************************************************
    
20. 
    
21. Address of langpack :  260000
    
22. Exact size of langpack :  B222 = 45602
    
23. Full size of langpack :  10000
    
24. Empty area in langpack :  26B222 - 26FFFF = 19934
    
25. Number of languages :  1
    
26. Number of messages in langpack :  3889
    
27. Number of messages in firmware :  817
    
28. Version of langpack :  lg44
    
29. 
    
30. ********************************************************************************
    
31. 
    
32. Number of menus :  1
    
33. Number of items :  1
    
34. 
    
35. ********************************************************************************

复制代码

看串号！！！怎么会这样呀？？

手机上显示是352079001052321

怪怪的！

发信息拿到解锁码也解不开！

刚刚拆机备份出了8M的资料！
还有EEP
要怎样配合解锁呀？？


还有。我看论坛上的友友用Sm打开SX1的FLASH时，加载基点都是800000
而我却是7FFFEE

为什么呀？？

leoleo

RPWT

comdin

原帖由 leoleo 于 2006-6-13 07:41 PM 发表
RPWT

:(:(:(

answer

原帖由 leoleo 于 2006-6-13 19:41 发表
RPWT

看的云里雾里的！

comdin

RPWT＝人品问题、、、、、

camlee

晕死!
RPWT=人品问题

camlee

呵呵,你早我一步!

comdin

解开了。。。。呵，，

Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
BFB Speed 115200 Baud - Ok.
HWID: 194 (SX1)
SX1 lg44 Sw15 07.10.04 11:11:57
IMEI: 352079001052321
DisplayID: 0, Unknown or misses
Code(04): OTP open
Code(08): BootKEY is unknown
Code(0D): Keys are registered in BCORE
Code(10): Minimal access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Battery Voltage 3847 mV.
SecurityMode: Customer
Read Keys...
SecurityMode: Customer
Work only in FactoryMode! Use Skey!
Phone off...
Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
BFB Speed 115200 Baud - Ok.
HWID: 194 (SX1)
SX1 lg44 Sw15 07.10.04 11:11:57
IMEI: 352079001052321
DisplayID: 0, Unknown or misses
Code(04): OTP open
Code(08): BootKEY is unknown
Code(0D): Keys are registered in BCORE
Code(10): Minimal access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Battery Voltage 3843 mV.
SecurityMode: Customer
Skey not found in Joker.ini!
Send SKey(12345678)...
Phone Off.
SKey Send: Ok! - Please Check up!
Start...
Loading BootsModel(SX1)...
Sending StartBoot Ok.
Sending MainBoot Ok.
Com3 115200 BAUD: Ok.
SIEMENS SX1 lg44 Sw15
Soft FlashID: 0089/8854 (0090/0090)
FlashID: 0089/8854
Flash Size: 8Mb
Region(1): Blocks 127, Size 64Kb
Region(2): Blocks 8, Size 8Kb
Start EEPROM segments at addres 0xFE0000
FSN: 59CB47A7 -> PhoneID: A747CB59
Error IMEI in OTP!
HASH: 4ED38F726F5FCD15D6D36A800ED3303C
Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
BFB Speed 115200 Baud - Ok.
HWID: 194 (SX1)
SX1 lg44 Sw15 07.10.04 11:11:57
IMEI: 352079001052321
DisplayID: 0, Unknown or misses
Code(04): OTP open
Code(08): BootKEY is unknown
Code(0D): Keys are registered in BCORE
Code(10): Minimal access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Battery Voltage 3841 mV.
SecurityMode: Customer
Read Keys...
SecurityMode: Customer
Work only in FactoryMode! Use Skey!
Read Info...
SecurityMode: Customer
Work only in FactoryMode! Use Skey!
Phone off...
Start...
Loading BootsModel(SX1)...
Sending StartBoot Ok.
Sending MainBoot Ok.
Com3 115200 BAUD: Ok.
SIEMENS SX1 lg44 Sw15
Soft FlashID: 0089/8854 (0090/0090)
FlashID: 0089/8854
Flash Size: 8Mb
Region(1): Blocks 127, Size 64Kb
Region(2): Blocks 8, Size 8Kb
Start EEPROM segments at addres 0xFE0000
FSN: 59CB47A7 -> PhoneID: A747CB59
Error IMEI in OTP!
HASH: 4ED38F726F5FCD15D6D36A800ED3303C
Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
BFB Speed 115200 Baud - Ok.
HWID: 194 (SX1)
SX1 lg44 Sw15 07.10.04 11:11:57
IMEI: 352079001052321
DisplayID: 0, Unknown or misses
Code(04): OTP open
Code(08): BootKEY is unknown
Code(0D): Keys are registered in BCORE
Code(10): Minimal access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Battery Voltage 3839 mV.
SecurityMode: Customer
Get IMEI...
IMEI: 352079001052321
Phone off...
Start...
Loading BootsModel(SX1)...
Sending StartBoot Ok.
Sending MainBoot Ok.
Com3 115200 BAUD: Ok.
SIEMENS SX1 lg44 Sw15
Soft FlashID: 0089/8854 (0090/0090)
FlashID: 0089/8854
Flash Size: 8Mb
Region(1): Blocks 127, Size 64Kb
Region(2): Blocks 8, Size 8Kb
Start EEPROM segments at addres 0xFE0000
FSN: 59CB47A7 -> PhoneID: A747CB59
Error IMEI in OTP!
HASH: 4ED38F726F5FCD15D6D36A800ED3303C
Use EXT IMEI: 352079001052321
USE SKEY: 12345678
*#0000*12345678# - Network Lock
*#0001*12345678# - Service Provider Lock
*#0002*12345678# - Corporate Code
*#0003*12345678# - Phone Code
*#0004*12345678# - Network Subset Lock
*#0005*12345678# - Only Sim
Read BCORE addr: 0x800000 size: 0x020000...
BCORE backup in ".\Backup\SX1lg44Sw15_BCORE_060613210000.bin" file.
Write BCORE at addr: 0x800000...
Change BCORE HASH - Ok.
Read EEPROM addr: 0xFE0000 size: 0x020000...
EEPROM backup in ".\Backup\SX1lg44Sw15_EEPROM_060613210018.bin" file.
Write EEPROM addr: 0xFE0000 size: 0x020000...
Change BOOTKEY - Ok.
Change EEP0076 - Ok.
Change EEP5009 - Ok.
Change EEP5077 - Ok.
Change EEP5121 - Ok.
Change EEP5122 - Ok.
Change EEP5123 - Ok.

comdin

谢谢昆明的图片、、、、、、、

willsoon

看着害怕，不知所云

comdin

呵，，简单点就是解锁成功了、、、、、、、、

segalgx

SE SKEY: 12345678
*#0000*12345678# - Network Lock
*#0001*12345678# - Service Provider Lock
*#0002*12345678# - Corporate Code
*#0003*12345678# - Phone Code
*#0004*12345678# - Network Subset Lock
*#0005*12345678# - Only Sim

哈哈，全部重置了

comdin

是的！串号竟然和OTP里的不一样、、、、晕死、、、