- 积分
- 27
- 实力分
- 点
- 金钱数
- 两
- 技术分
- 分
- 贡献分
- 分
|
发表于 2009-4-27 13:09:59
|
显示全部楼层
v7
The WRT54G v7 uses an Atheros AR2317 chip, has 2MB ROM, 8MB RAM and runs VxWorks. It is not supported by DD-WRT as the WRT54G v7 isn't Broadcom based. The WRT54G v7 will probably never be supported
[edit] v7.2 and v8
DD-WRT v24 RC1 micro supports this router.
[DD-WRT v24 RC3] The the WRT54 Gv8 and WRT54GSv7 is now fully supported, but requires a special flashing procedure (which is simpler than the v5 and v6 vxworks killer procedure).
See http://www.dd-wrt.com/phpBB2/viewtopic.php?t=20095
[DD-WRT v24 RC4] There are some issues with RC3 which are resolved in RC4. CFE update is critical if updating from RC3. There is an issue with port 4 not working on some routers using RC4.
[DD-WRT v24 RC5] How To Flash the WRT54Gv8 Just follow the instructions as listed, be sure to restart your modem when the install is finished and don't forget the login is root with a password of admin. headpin11
[DD-WRT v24 RC6.2] Supported -> Broadcom Generic / Micro
[DD-WRT v24 Final] As of late April 2008, the WRT54G v7.2 is now supported via the micro version of DD-WRT. (Note that the micro and the mini versions are different. For the differences, read What is DD-WRT?#File Versions).
Eko's detailed instructions are HERE in English, German, and French.
And the relevant files are HERE.
The best thread in the forums on this topic is HERE. |
|