爱技术

 找回密码
 注册会员

QQ登录

只需一步,快速开始

微信登录

微信扫一扫,快速登录

搜索
查看: 281|回复: 4
收起左侧

[分享] Repair ALL SX1 here

[复制链接]
发表于 2006-5-29 15:53:24 | 显示全部楼层 |阅读模式

马上注册,结交更多好友,享用更多功能,让你轻松玩转社区。

您需要 登录 才可以下载或查看,没有帐号?注册会员 微信登录

x
Repair ALL SX1 here

--------------------------------------------------------------------------------

Hey everybody !

Here`s my next guide about Siemens reviving, now about this crazzzyyy SX1 !!!

REPAIR ALL software Bugs of SX1, not going in SWUP mode, blinking, not turning on, dead .. etc


Tools needed:
Software: V-Klay v3.3, Joker v3.4.3, SYMBIAN FULL Flash file 32Mb (with loader for V-Klay), E-Gold FullFlash 8Mb
Hardware: ANY S-Gold based x65/75 phone (with 32Mb flash chip)

There are 2 types of SX1:



One has BIG FlashIC, second has SMALL as ANY S-Gold x65 phones with 32Mb !
For example, let`s say, we have SX1 with BIG Flash IC and a working C65 phone;

So what you have to do is to put a SMALL FlashIC in this C65, as SX1 has BIG one it will not fit in C65 board, so you`ll need a SMALL flashIC from any x65 S-Gold phone (C65, CX65, ..etc)



So now we have to Write a SX1 Symbian FLASH part in it

Copy provided loader x65pv.vkd into V-Klay`s loader folder(V_KLay\data\Loaders), And open up V-Klay !
Choose options like this:



Thus, open Symbian FullFlash and press write memory (new window will come up asking if you really want to write fullflash, just press YES)
So, Connect TestPoint with GROUND and power on the phone shortly,



boot.bin will go, and you`ll hear a BEEP sound, soft saying Pause.bin, now you have to DISCONNECT TestPoint from ground, Software will boot and start prepairing to READ BACKUP, so just cancel it, then it will START WRITING Fullflash ...

In about a half an hour (depends what speed you are writting full with), it will say Flashing Completed Successfully !!!

Now take out the FLASH IC from C65 and put it in SX1 OMAP board, (reball it and resolder as well )

See the balls which you will IGNORE



After you have Resoldered it well, replace these 2 resistors and short the rest two
You can see well in this picture:



Symbian Flash is DONE !

What about E-Gold part ?!

Now open up Joker, and Fullflash the phone with 8Mb fullflash, make recalc all keys after flashing as usual !


AND POWER UP SX1 !!!!

Damn this crazzzyyyy SX1 is working now !!!

web-site access:
User: GEORGIA
Pass: Tbilisi

Password of protected files is: Tbilisi

Very BIG thanks to my friend DJON (vladvil) for helping




看不太明白,原帖子在这,图片看不见了。 
http://forum.gsmhosting.com/vbb/showthread.php?t=289221
发表于 2006-5-29 16:12:57 | 显示全部楼层
看看先……
回复 支持 反对

使用道具 举报

 楼主| 发表于 2006-5-29 21:40:33 | 显示全部楼层
看明白没有?
回复 支持 反对

使用道具 举报

发表于 2006-5-29 21:58:44 | 显示全部楼层
好象是借尸还魂?????
回复 支持 反对

使用道具 举报

发表于 2006-5-30 00:36:09 | 显示全部楼层
呵呵,楼上说的不错!!
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 注册会员 微信登录

本版积分规则

小黑屋|Archiver|手机版|爱技术 ( 沪ICP备08115260号-3 )

GMT+8, 2025-8-5 04:03

Powered by Discuz! X3.4 Licensed

Copyright © 2001-2020, Tencent Cloud.

快速回复 返回顶部 返回列表